Dry Ice Reformer Model DIR8X5

By using an external dosing system, the DIR8X5 unit can produce any of the international standard thickness from 20mm, 25mm, 30mm to 50mm.  The reformer has a carbon steel body with USDA approved coating. The external dosing system is not provided by TOMCO₂.

Dry Ice Reformer DIR8X5

Features & General Specifications:

• Production Rate: Approximately 450 pieces per hour.
• Slice Size: Nominal 8.27" x 4.92” x 1.97" maximum thickness (17.8 cm x 17.8 cm x 7 cm). Custom sizing available upon request.
• Drive Media: Hydraulic 20 HP
• Electrical Characteristics: 400 volt, 50 Hz, 3 phase. Other voltages available on request.
• Steel frame construction and stainless steel mold
• Weigh scale brackets for mounting scale heads (optional)
• CE marked
• Standard industry components
• Optional custom conveyors are available to automate pellets from dry ice machine to reformer and to remove slabs from the reformer. Unit can operate with any size pellet or small broken scrap pieces.
• Optional level control sensor that allows the hopper to maintain a constant level during operation.  Unit can be equipped with low bin level detection.
• Local mounted Allen Bradley MicoLogix 1200 PLC and Hakko Color Touch Screen Display
• Approximate Shipping Weight: 3,300 lbs. (1400 kg)*
• Full size hydraulic drip pan
• Hydraulic Oil Capacity: 85 gallons (322 ltrs)  (oil not included)

** Published weight includes equipment only. Shipping crate(s) are not included.