Vertical Urethane Insulated
You can store up to 75 Tons (68.0 MT) of CO2 in a very limited space with this efficient and reliable vertical aluminum skin storage unit.
- Pressure vessel: Constructed in accordance with Section VIII, Division 1 of the ASME Code for Unfired Pressure Vessels for a maximum allowable working pressure (MAWP) of 350 psig (24.1 bar). 2" NPS & under tank nozzles are schedule 80 stainless steel.
- Seismic: Per UBC 1997 seismic zone 4, importance factor of 1.0, soil profile types Sa, Sb, Sc, Sd or Se, greater than 10 km from a type A seismic source. Design to other Codes available on request.
- Piping: Schedule 80 seamless pipe, 2,000 lbs (907.2 kg) forged steel fittings, 1/4 turn stainless steel isolation valves
- Safeties: Dual ASME approved direct spring operated, sized for unconfined outdoor installation. Larger capacity relief valves will be required for installation when located indoors or in a fire area.
- Insulation: 4" (10.16 cm) Polyurethane
- Outer jacket: .063" (0.16 cm) Aluminum
- Vaporizers Optional: Steam, water or electric, capacities to 6,000 lbs/hr (2722 kg/hr)
- Liquid level gauge: Differential pressure indicator type with 6" (15.24 cm) dial
- Pressure gauge: 0 - 600 psig with 6" (15.24 cm) dial
- Electrical Characteristics: 208/220/230/460 V, 60 Hz, 3 Phase. Other voltages available upon request.
- Control Cabinet: .040" (0.10 cm) prefinished aluminum, complete cabinet lifts off for total accessibility to refrigeration unit.
- Manway installed for internal inspection and ease in cleaning
- Stainless steel nozzles and valves
Vertical Carbon Dioxide Storage Units
| Model | Nominal Ton Capacity | Height | Length | Width | Empty Weight |
| 681VA | 6 Tons | 8'4" | 16'1" | 6'5" | 10,000 lbs |
| 5.4 MT | 2.54 m | 4.90 m | 1.96 m | 4536 kg | |
| 1481VA | 14 Tons | 8'9" | 20'4" | 8'0" | 15,500 lbs |
| 12.7 MT | 2.67 m | 6.20 m | 2.44 m | 7031 kg | |
| 2681VA | 26 Tons | 8'9" | 31'10" | 8'0" | 25,000 lbs |
| 23.5 MT | 2.67 m | 9.70 m | 2.44 m | 11340 kg | |
| 3081VA | 30 Tons | 8'9" | 35'10" | 8'0" | 30,000 lbs |
| 27.2 MT | 2.67 m | 10.92 m | 2.44 m | 13608 kg | |
| 5081VA | 50 Tons | 10'5" | 39'6" | 9'6" | 40,000 lbs |
| 45.4 MT | 3.18 m | 12.04 m | 2.90 m | 18144 kg | |
| 7581VA* | 75 Tons | 11'5" | 45'0" | 10'6" | 55,000 lbs |
| 68.0 MT | 3.48 m | 13.72 m | 3.20 m | 24948 kg |
*Standard 7581VA vertical model is not suitable for maximum seismic conditions.
NOTE: The dimensions shown above are for shipping tank in a horizontal position.
TOMCO2 Email Newsletter
CO2 Storge Units
TOMCO2 Equipment Company
3340 Rosebud Road
Loganville, GA 30052
Phone: 770-979-8000
Toll Free: 800-832-4262
Fax: 770-985-9179
> Contact Us
Loganville, GA 30052
Phone: 770-979-8000
Toll Free: 800-832-4262
Fax: 770-985-9179
> Contact Us