Nozzles

There are two types of Fogex nozzles that are available, the F20 and F27. The F20 nozzle is used or open head total flood deluge systems and the F27 is used for screening unenclosable openings to prevent oxygen entering the protected area.

Please refer to the design manual for nozzle spacing, flow rates and ceiling heights. The nozzle J001 should be used for installing or removing Fogex nozzles to prevent damage to nozzles, Dust caps Are available for dirty environments. Each nozzle is equipped with screen to prevent blockage of the small orifice. It is recommended that every nozzle on the system be replaced after each system discharge.

Key Features:

• Open type Design
• Stainless Steel Construction
• No Moving Parts
• Low Flow Rate
• Fine Droplets
• Provided with screen to Prevent Blockage
• High pressure 1450 psi ( 100 bar)
• FM Approved