|
| Electric Vaporizers |
Your right
choice if steam or water is unavailable. These vaporizers are highly energy
efficient, and will provide all your vapor needs |
|
|
Modular Electric Pressure Build Carbon
Dioxide Vaporizers |
|
 |
|
Features:
- Designed to NEMA 3R
standards
- 1" (2.54 cm) Carbon Dioxide blow down valve
- Dual high temperature shutdown switches
- 350 psig relief valve
- pressure control set for operation between 245 psig and 255
psig (may be field adjusted)
- 230/460 Volt, 60 Hz., 3 Phase operation (Other voltages
available upon request)
|
| Model |
Capacity |
Wattage |
Dimensions (L x W x
H) |
Weight |
| M-259 |
245
lbs/hr @ 230V |
9,000 |
60" x
19" x 50" |
231
lbs |
| 111.13
kg/hr at 230 V |
9,000 |
152.4 cm
x 48.3 cm x 127 cm |
105
kg |
| M-418 |
490 lbs/hr @ 230V |
18,000 |
60" x 19" x 50" |
233 lbs |
| 222.26 kg/hr at 230 V |
18,000 |
152.4 cm x 48.3 cm x 127 cm |
106 kg |
| M-628 |
760
lbs/hr @ 230 V |
28,000 |
55" x
21" x 57" |
386
lbs |
| 344.76
kg/hr at 230 V |
28,000 |
139.7 cm
x 53.3 cm x 144.8 cm |
175
kg |
| M-1256 |
1525 lbs/hr @ 230V |
56,000 |
101" x 21" x 57" |
698 lbs |
| 691.74 kg/hr at 230 V |
56,000 |
256.5 cm x 53.3 cm x 144.8 cm |
317 kg |
|
|
| Direct to Process
Vaporizers |
|
 |
|
Features:
- Designed to NEMA 3R
standards
- Replaceable heater
platen
- Pilot light indicator for
control power & heater cycle
- Low discharge temperature safety
cut off
- Circuit breaker load protection
- 230/460 Volt, 60 Hz., 3 Phase
operation (Other voltages available upon request)
|
| Model |
Capacity |
Wattage |
Dimensions |
Weight |
| DTP-15 |
375
lbs/hr |
15,000 |
22" x
23" x 37" |
265
lbs |
| 170.1
kg/hr |
15,000 |
55.9 cm
x 58.4 cm x 94 cm |
120
kg |
| DTP-30 |
750 lbs/hr |
30,000 |
22" x 23" x 37" |
305 lbs |
| 340.2 kg/hr |
30,000 |
55.9 cm x 58.4 cm x 94 cm |
139 kg |
| DTP-45 |
1125
lbs/hr |
45,000 |
22" x
23" x 37" |
345
lbs |
| 510.3
kg/hr |
45,000 |
55.9 cm
x 58.4 cm x 94 cm |
157
kg |
| DTP-60 |
1500 lbs/hr |
60,000 |
22" x 23" x 37" |
375 lbs |
| 680.4 kg/hr |
60,000 |
55.9 cm x 58.4 cm x 94 cm |
170 kg |
|
|
|
Steam Heated Water Bath Vaporizers |
|
|
Available upon request and are based
on customer supplied steam capacities and pressures. |
|
|
Water Vaporizers |
|
| Use the hot water generated
elsewhere in your plant |
 |
|
Features:
- CO2
temperature rise from 0°F (-17.8°C) to 50°F (10°C) at listed
capacities, flow rates and water temperatures
- ASME coded heat exchanger with a tube
- side working pressure of 400 psig and a shell side working
pressure of 150 psig
- Design temperature -20°F (-28.89°C) to 150°F
(65.56°C)
- Low water supply protection
- Low discharge CO2 temperature
protection
- Pressure safety relief protection for CO2 and water
- 4" (10.16 cm) 150 lbs (68.04 kg) flanged water inlet &
outlet
- 1" (2.54 cm) FPT CO2 inlet
- 1½" (3.81 cm) FPT CO2
outlet
|
| Model |
Capacity |
Dimensions |
Weight |
| WV-40 |
4,000
lbs/hr |
137" x
24" x 32" |
1,050
lbs |
| 1814.4
kg/hr |
348 cm x
61 cm x 81.3 cm |
477
kg |
| WV-60 |
6,000 lbs/hr |
139" x 26" x 32" |
1,650 lbs |
| 2721.6 kg/hr |
353 cm x 66 cm x 81.3 cm |
750 kg |
|
|
| Vapor
Heater |
|
| The ultimate insurance against regulator freeze-ups and
condensation on pipe lines. Increases the temperature of Carbon Dioxide from an
average storage temperature of 0°F (17.8°C) to the desired temperature
level. . . |
 |
|
Features:
- Heat transfer tube and heating
elements
- Pressure cast in common platen for maximum efficiency
- Designed to NEMA 12 standards
- Overheat protection
- Adjustable temperature control
- Stainless steel mounting brackets
- ½" (1.27 cm) MPT inlet & outlet connections
- Allowable working pressure 1000 psig
- Flow rate 720 lbs/hr (326.59 kg/hr) @ 70°F (21.11°C)
- 230/460 Volt, 60 Hz., 1 Phase operation
|
| Model |
Capacity |
Wattage |
Dimensions |
Weight |
| CVH-4 |
720
lbs/hr |
4,000 |
14" x 8.5" x
12" |
47 lbs |
| 326.59
kg/hr |
4,000 |
35.6 cm x 21.6 cm x
30.5 cm |
21 kg |
|
|
| * Published
weights include equipment only. Shipping crate(s) are not
included. |
|
| * Click on images for product specifications formatted
for printing. |